100G QSFP28 Active Optical Cable
The 100G QSFP28 active optical cable is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ AOC for 100 Gigabit Ethernet and Infiniband EDR usage. This AOC is a high performance module for short-range multi-lane data communication and interconnect usage. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25.78125 Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Fiber Optic UK Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
100G QSFP28 active optical cable Feature
Bandwidth density of 100 Gbps bi-directional
Transmission data rate up to 25.8Gbps per channel
4 channels 850nm 25G VCSEL array
4 channels 25G PIN photo detector array
Internal CDR circuits on both receiver and transmitter channels
Hot Pluggable QSFP28 form factor
Maximum link length of 100m on OM3 Multimode Fiber
(MMF)and 150m on OM4 MMF
Operating case temperature 0°C to +70°C
3.3V power supply voltage
Low power consumption <2.5W
RoHS 6 compliant(lead free)
100G QSFP28 active optical cable usage
IEEE 802.3bm 100GBASE SR4
InfiniBand EDR
Datacom/Telecom switch & router connections
Data Aggregation and Backplane usage
Proprietary Protocol and Density usage
100G QSFP28 AOC
40G QSFP to QSFP Active Optic Cables
40G QSFP to QSFP active optic cables are a high performance, low power consumption, long reach interconnect solution sup porting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE - SR4. Fiber Optic UK QSFP AOC is an assembly of 4 full - duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an agg regated rate of 40Gb/s.
40G QSFP to QSFP active optic cables descriptions
Full duplex 4 channel 850nm parallel active optical cable
Transmission data rate up to 10.3Gbit/s per channel
SFF-8436 QSFP+ compliant
Hot pluggable electrical interface
Differential AC-coupled high speed data interface
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Maximum link length of 300m on OM3 Multimode Fiber (MMF)and 400m on OM4 MMF
Low power consumption <1.5W
Operating case temperature 0°C to +70°C
3.3V power supply voltage
RoHS 6 compliant
40G QSFP to QSFP active optic cables usage
Infiniband transmission at 4ch SDR, DDR and QDR
40GBASE-SR4 40G Ethernet
Data Centers
40G QSFP to 4 SFP+ Active Optical Cable
40G QSFP to 4 SFP+ Active Optical Cable offers IT professionals a cost - effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical usage, users can install this splitter Active Optical cable between an available QSFP port on their 40 Gbps rated switch and feed up to four upstream 10GbE - SFP+ enabled switches. Each QSFP - SFP+ splitter Active Optical cable descriptions a single QSFP connector (SFF - 8436) rated for 40Gb p s on one end and (4) SFP+ connectors (SFF - 8431), each rated for 10 - Gb/s, on the other.
40G QSFP to 4 SFP+ Active Optical Cable descriptions
Electrical interface compliant to QSFP + connector (SFF-8436) and SFP+ connectors (SFF-8431)
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector receiver
Up to 100m on OM3 MMF
Operating case temperature: 0 to 70°C
All-metal housing for superior EMI performance
RoHS compliant (lead free)
40G QSFP to 4 SFP+ breakout Active Optical Cable usage
40 Gigabit Ethernet
Fibre Channel usage
InfiniBand QDR,SDR,DDR
High-performance computing clusters
Servers, switches, storage and host card adapters
40G QSFP to 8 LC Active Optical Cable
40G QSFP+ to 8x LC Breakout Active Optical Cable provide 40GbE systems the ability to connect to 10GbE switches or adapter cards. It provides connectivity between devices using QSFP+ port on one end and 8x LC connectors on the other end. Fiber Optic UK currently offers these cables in lengths of 100 meters on OM3 MMF 40G QSFP+ less than 1.5W.
40G QSFP+ to 8x LC Breakout Active Optical Cable descriptions
Full duplex 4 channel 850nm parallel active optical cable
Transmission data rate up to 10.3Gbit/s per channel
SFF-8436 QSFP+ compliant
Hot pluggable electrical interface
Differential AC-coupled high speed data interface
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Maximum link length of 300m on OM3 Multimode Fiber (MMF)and 400m on OM4 MMF
Low power consumption
Housing isolated from connector ground
Operating case temperature 0°C to +70°C
3.3V power supply voltage
RoHS 6 compliant
40G QSFP+ to 8x LC Breakout Active Optical Cable usage
Infiniband transmission at 4ch SDR, DDR and QDR
40GBASE-SR4 40G Ethernet
Data Center
2016
Sitemap of Fiber Optic UK Limited.
PDF catalogues of our computer cable products.A to Z
Making contract 