Fiber Optic U.K

10G SFP+,Active Optical Cables,40G QSFP,100G QSFP28,120G CXP.

10G SFP+ to SFP+ Active Optical Cable
10G SFP+ to SFP+ Active Optical Cables are direct - attach fiber assemblies with SFP+ connectors. They are suitable  for  very  short  distances  and  offer  a  cost - effective  way  to  connect  within  racks  and  across adjacent racks. Fiber Optic UK SFP+ Active Optical Cabl es’ s length is up to 3 00 meters on OM3 MMF.

40G QSFP to QSFP Active Optic Cables
40G QSFP to QSFP active optic cables are a high performance, low power consumption, long reach interconnect solution sup porting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE - SR4. Fiber Optic UK QSFP AOC is an assembly of 4 full - duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an agg regated rate of 40Gb/s.

40G QSFP to 4 SFP+ Active Optical Cable
40G QSFP to 4 SFP+ Active Optical Cable offers IT professionals a cost - effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical usage, users can install this splitter Active Optical cable between an available QSFP port on their 40 Gbps rated switch and feed up to four upstream 10GbE - SFP+ enabled switches. Each QSFP - SFP+ splitter Active Optical cable descriptions a single QSFP connector (SFF - 8436) rated for 40Gb p s on one end and (4) SFP+ connectors (SFF - 8431), each rated for 10 - Gb/s, on the other.

40G QSFP to 8 LC Active Optical Cable
40G QSFP+ to 8x LC Breakout Active Optical Cable provide 40GbE systems the ability to connect to 10GbE switches or adapter cards. It provides connectivity between devices using QSFP+ port on one end and 8x LC connectors on the other end. Fiber Optic UK currently offers these cables in lengths of 100 meters on OM3 MMF 40G QSFP+ less than 1.5W.

100G QSFP28 Active Optical Cable
The 100G QSFP28 active optical cable is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ AOC for 100 Gigabit Ethernet and Infiniband EDR usage. This AOC is a high performance module for short-range multi-lane data communication and interconnect usage. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25.78125 Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Fiber Optic UK Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

120G CXP to CXP Active Optical Cable
CXP to CXP active optic cables are a high performance, low power consumption, long reach interconnect solution supporting 120G Ethernet, fiber channel and PCIe. It is compliant with the 120Gbits Small Form factor Hot-Pluggable CXP-interface. Fiber Optic UK CXP AOC is an assembly of 12 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 120Gb/s. The 120 Gbps CXP Active Optical Cable is a high-density, low-weight, bidirectional interconnect that can reach up to 100 meters on OM3 Multimode fiber, which is hot-pluggable and fully compliant with the CXP Multi-source Agreement (MSA).

SC/APC Single mode connector zirconia ferrule,conical,step,ceramic,with flange,without flange.

Zirconia Ferrules for SC/APC Single mode Fiber Optic Connectors Specifications
Material Zirconia
Concentricity (Standard) Singlemode ? 1 micron
Inner Diameter Tolerance Singlemode +1/-0 micron
Outer Diameter Tolerance Singlemode ±0.5 micron
Length Tolerance (No flange) 10.5 ±0.05mm
V-Groove 60/90 ±5 degrees

Zirconia Ferrules for SC/APC Single mode Fiber Optic Connectors Features:
Good compatibility
Accurate mechanical dimensions
Good reliability and stability
Compliant with RoHS, Bellcore, IEC
High performance & durability
Low insertion loss
Low back reflection
Standard and custom configuration

Zirconia Ferrules for SC/APC Single mode Fiber Optic Connectors Application:
Telecommunication
CATV
LAN (including FTTx)
Data network
High performance fiber optic connectors used in environments requiring durability after repeated matings, low insertion loss and low back reflection
Fiber stub
SC, FC, ST, MU, D4, MU, LC , DIN and other fiber optic connectors
Single mode and multimode

FC/APC Single mode connector zirconia ferrule,conical,step,ceramic,with flange,without flange.

Zirconia Ferrules for FC/APC Single mode Fiber Optic Connectors Specifications
Material Zirconia
Concentricity (Standard) Singlemode ? 1 micron
Inner Diameter Tolerance Singlemode +1/-0 micron
Outer Diameter Tolerance Singlemode ±0.5 micron
Length Tolerance (No flange) 10.5 ±0.05mm
V-Groove 60/90 ±5 degrees

Zirconia Ferrules for FC/APC Single mode Fiber Optic Connectors Features:
Good compatibility
Accurate mechanical dimensions
Good reliability and stability
Compliant with RoHS, Bellcore, IEC
High performance & durability
Low insertion loss
Low back reflection
Standard and custom configuration

Zirconia Ferrules for FC/APC Single mode Fiber Optic Connectors Application:
Telecommunication
CATV
LAN (including FTTx)
Data network
High performance fiber optic connectors used in environments requiring durability after repeated matings, low insertion loss and low back reflection
Fiber stub
SC, FC, ST, MU, D4, MU, LC , DIN and other fiber optic connectors
Single mode and multimode